PRG face roller burnishing tool, from 1 mm dia.

Technical data of PRG, from 1 mm dia.

Technical data of PRG, from 1 mm dia.

Machining

Flat surfaces

Diameter range

from 1 mm

Rollers     

according to requirement

Standard mount

Cylinder shank (with clamping surface on request) or Morse taper

Optional tool equipment

-VDI, HSK etc. mounts

-Inside cooling

Use parameters to be used

Workpiece oversize

up to 0.01 mm

Tool preclamping

up to 4 mm

Lubrication

emulsion or oil; filtration of the lubricant (<40µm) can improve the surface quality and the tool life

Pre-machining of workpiece

Surface roughness up to 15 µm

Maximum hardness of workpiece

45HRC

Speed

up to 40 rpm

Feed rate

0.1 - 0.3 mm/rev;    

Return traverse       always in rapid traverse

Dwell time under pressure

5 - 20 rotations